Bộ chống sét polymer

Mã sản phẩm: Không có

Bộ chống sét loại MSLA được thiết kế để hoạt động trong các hệ thống phân phối, ở điện áp từ 3 đến 36 kV. Nó được thiết kế đặc biệt để bảo vệ máy biến áp, tụ điện, trạm chính, đường dây, phần mở rộng, chống lại các đợt tăng điện áp trong các hệ thống phân phối điện áp trung bình. Các Varistor oxit kim loại (MOV) được bao bọc bởi một lồng làm bằng lõi sợi thủy tinh ECR, tạo ra một cấu trúc cứng, đảm bảo khả năng chống chịu cơ học cao. Vỏ cao su silicon, chống lại bức xạ UV và điều kiện thời tiết nói chung, được lưu hóa trực tiếp trên các khối Varistor oxit kim loại (MOV), lõi sợi thủy tinh ECR và các đầu cực nhôm, kết hợp hoàn toàn các thành phần mà không để lại lỗ rỗng hoặc khe hở, tạo ra một hệ thống bịt kín tuyệt vời. Nó được trang bị bộ ngắt kết nối tự động có đường cong hiệu suất phối hợp hoạt động với 12k cầu chì liên kế

Mô tả

Đặc trưng:

  • Bộ chống sét Sao Mai có vỏ polymer đúc khuôn để có lớp phủ kín hoàn hảo chống lại sự xâm nhập của hơi ẩm
  • Sợi thủy tinh cường độ cao cho thiết kế chịu được lỗi cao

Integrated Ground Lead Disconnet for fast, reliable operation.  Operates in less than 2 seconds at 5 amps and less than 2 cycles at 1,000 amps. As a special supporting product for arrester, the disconnector is series connected with arrester. When the arrester comes across any fault, it would operate quickly and let the failed arrester disconnect from the power grid, meanwhile, it would give obvious disconnection symbol, so that the maintenance personnel would find the point of failure and change the arrester in time. On the other hand, when the arrester works normally, disconnector does not work and is under low impedance state, it would not affect the protective characteristics of arrester. The arresters that have been equipped with disconnectors really realize safe operation, maintenance free, convenient and reliable performance.It is popular to use disconnectors for distribution type, power station type and line type arresters in power grid in Japan, occident countries and other developed countries and districts.The disconnectors produced by out company adopt the latest thermal-explosion design, with advantages of fast response and misoperation free, can be equipped with arresters of various models of 3kV above, having the same operating conditions with that of arresters.

Các thông số đặc trưng Ampe-giây điển hình của bộ ngắt kết nối

Dòng điện (A) 800 200 20 5 0.5 0.05
Thời gian hoạt động (S) 0.01~0.02 0.02~0.05 0.1~0.2 0.5~1.0 20~50 200~500

 

NGƯỜI BẮT GIỮ

Điện áp liên tục
A preliminary selection that is based on selecting an arrester having a “Continuous Operating Voltage”, or Uc, that equals or exceeds the normal system maximum line-to-earth operating voltage is made. Reference IEC 60099-5.

Quá áp tần số công suất
The second application criterion to be met is a condition established by the effectiveness of system grounding. During a single line-to-earth fault, under maximum system voltage conditions, the arrester selected should have a “Rating” (Ur) that will not be exceeded by the voltages on the unfaulted phases at the point of arrester application. One must pay particular attention to systems having low coefficients of grounding, ungrounded systems and systems that are resonant grounded or that may become ungrounded under abnormal conditions of operation. This second voltage consideration may be modified for various system conditions as long as the application does not violate the selected arrester’s “Temporary Overvoltage Capability (TOV)” .Temporary system conditions resulting in sinusoidal power-frequency voltages that exceed arrester “Continuous Operating Voltage, (Uc)” or even “Arrester Rating, (Ur)” can be allowed. Consider the permissible magnitude and duration of these overvoltages (including the full time of system back-up protection), with appropriate allowances for any recent arrester discharge energies.The voltage withstand capability application on ungrounded systems is 1.035 per unit of COV (Uc) for 24 hours. Systems which permit earth faults to remain undetected or operate with one phase earthed for periods in excess of 24 hours will require the use of an arrester having aUc (continuous capability) equal to the system maximum phase-to-phase voltage.
Trong một số điều kiện hệ thống đặc biệt, chẳng hạn như cấp điện cho máy biến áp bằng một số loại kết nối và cộng hưởng sắt từ, bộ chống sét có thể chịu được điện áp cao hơn. Để đảm bảo rằng khả năng của bộ chống sét không bị vượt quá, các nguồn lực của kỹ sư ứng dụng hệ thống có sẵn để đưa ra khuyến nghị.

Hiệu suất:
There are two series for The designs are tested in accordance with the latest ANSI/IEEE  standards for metal oxide arresters.

BỘ CẮT 1

 

Loạt MSLA-10 Loạt MSLA-05
01` High Currect – Sort Duration   100kA High Currect – Sort Duration   65kA
02 Low Current – Lon Duration  250 amps Low Current – Lon Duration  150 amps
03 Nominal discharge class per IEC  10kA Nominal discharge class per IEC  5kA
04 Chu kỳ hoạt động – 10kA Chu kỳ hoạt động – 10kA
05 Line Discharge Class per IEC:  Class 1 Line Discharge Class per IEC:  Class 1
06 Khả năng năng lượng tối thiểu – 100%
thử nghiệm sản xuất: 2,7kJ/kV
Khả năng năng lượng tối thiểu – 100%
thử nghiệm sản xuất: 2,7kJ/kV
07 Fault Withstand Capability:  20kA Fault Withstand Capability:  20kA rms-sym
08 REA được niêm yết REA được niêm yết

Thông số kỹ thuật:Thiết bị chống sét lan truyền 5 kA và 10 kA cho hệ thống MV đến 36 kV

 

    viVI