+84-28-3742 1888
+84-28-3742 1888

Power Poles

  • In the early days the overhead power cable mainly relied on wooden pole as the main material. As timber resources got scarce and difficult to obtain due to the protection by each country, concrete pole became an alternative. However, concrete pole is too heavy, not convenient to install and easy to be corroded by sandy wind, American and some European advanced countries pioneered using the FRP power pole as the replacement in attribute to its excellent properties of lightweight, good physical properties and anti-corrosion. Nowadays FRP power pole has been adopted as the choice of power transmission lines in most of the modern countries.

Description.

FRP Poles using newly invented technology to produce high quality FRP Pole with competitiveness. Using un-saturable polyester resin as

basic material and unidirectional fiberglass woven fabrics as skeleton, the FRP pole is taken shape by centrifugal process. It could be used

as luminary pole, utility pole, flag pole and other applications.

Advantages of FRP Pole.

1/ Non-conductive and excellent insulation property.

2/ Safe in accident cases.

3/ Anti-corrosion and rust free – especially suitable to be used under extreme weather condition including high humidity coastal area, desert,

oil field, high altitude and industrial area with acid and alkali condition.

4/ Light weight, around 1/3 weight of the steel lighting pole. Easy installation and save on labour, time and equipment.

5/ Maintenance free, long life span.

6/ Aesthetics, smooth surface with good finishing. Also can be colour matched to suit any environment.

7/ Excellent Mechanical Properties.

Material

Tensile Strenght

(103 PSI)

Flexual Strenght

(103 PSI)

Compression Strenght

(103 PSI)

Composite/FRP 80 100 45
Die Cast Aluminum 48 48 48
Low Carbon Steel 48 48 48
Stainless Steel 80 80 80

FRP with 80% fiber glass content using filament winding (Source: Reinforced Plastics Handbook/ second Edition by John Murphy)

Pole Types Comparision.

FRP Poles have distinctive advantages compared with the traditional material ones, such as steel pole, aluminum pole, concrete pole and

wood pole.

  FRP Poles Galvanized Steel Poles Aluminum Poles Concrete Poles
Light Weight G B A B
Direct Burial G B B A
Easy to Maintain G B A A
Color Stability G B B B
Easy to Install G B B B
Non-Conductive G B B G
Corrosion Resistance G B A
Long Life Span G A G A

                                                      G. Good                   A. Average                    B. Bad

FRP Pole Standard.

We follow BS 1990-1 specification, withstand max wind speed of 40m/sec.

1/ USA Standard: ANSI C136.20-1990; ASTM D4923-01, Class 1, National Pole Standard.

2/ EU Standard: EN40.

3/ China Standard: CNS-11652.

Bending Testing.

Applied loading is calculated based on wind speed of 60m/sec according to ANSI.

Pole Height (m) Deflection Design Max Deflection Loading (Kg) Note
4.5 10% 40 cm 54  
5.5 10% 50 cm 66  
6.5 10% 60 cm 74  
7.5 10% 70 cm 86  
8.5 10% 80 cm 94  
9.5 10% 90 cm 101  
10.5 10% 100 cm 112  
11.5 10% 110 cm 165  
12.5 10% 120 cm 179  

FRP Pole Specification & Design.

Our company designs and produces the FRP pole according to ANSI CI 136.20:1990. The exterior surface should be smooth and aesthetic,

shall be free of crack, air bubbles, damage or any exposed surface fiber. The surface of the pole should be finished with an ultraviolet-resistant

uniform coating and has exceptional weather-resistance performance. The interior surface should be free of stratification, blocking and white stain

that is the result of the fiber not being thoroughly wetted by the resin. Based on wind speed of 60m/sec equivalent to Beaufort Scale Force 17,

the pole top deflection induced by the wind acting on the pole shall not exceed 10% of the pole length.

For FRP Lighting pole divides into direct- burial pole and anchor-base pole, the direct-burial pole includes: shaft, single arm, double arm. Anchor-base

pole include: FRP base shaft, FRP base single arm, FRP base double arm, steel base shaft, steel base single arm and steel base double arm.

Our company has two tapers for the lighting pole, one type is 1/75, the minimum diameter is 80mm, the maximum diameter is 260mm and the maximum

length: 12000mm; the other type is 1/55, the minimum diameter is 80mm, the maximum diameter is 298mm and the maximum length is12000mm.

The cover of wire hole must be waterproof, the metal fittings to be used for interior fastening must be hot galvanized or stainless steel. The height of the

FRP Lighting Pole should have a tolerance of +30mm, -0mm and the thickness is +3mm, -0mm. The surface hardness of the pole should be over 35.

The bent strength of the pole should be over 320Mpa. According to AASHTO.LTS.2:198, the pole shall not exceed a maximum deflection of 10% of the

pole length above the ground line when subject to the maximum simulated wind loading and shall not have more than 1% permanent deflection.

Specification of single pole.

tieu chuan thiet ke cot dien
 High standard pole

Nominal height

(H)

Depth of planting

(P)

Height above ground

(H1)

Top dia of pole

(d1)

Bottom dia of pole

 (d2)

Ultimate load at pole top (Horizontal)

(W)

Load /mm of deflection at point of load

deflection under ultimate load

(D)

M M M mm mm KN N mm

6

7

8

1.2

1.2

1.5

4.8

5.8

6.8

150

150

150

236

248

263

2.39

2.31

2.40

9.3

6.0

4.8

472

718

917

8.5

9.0

9.5

1.5

1.5

1.5

7

7.5

8

150

150

150

270

277

284

2.81

2.46

2.52

4.5

3.6

3.1

1069

1239

1458

10

10.5

11

1.5

1.5

1.8

8.5

9

9.2

150

150

150

291

298

305

2.23

2.31

2.40

2.6

2.3

2.3

1627

1874

1913

12 1.8 10.2 150 320 2.26 1.7 2139
High standard pole

Nominal height

(H)

 

Depth of planting

(P)

 

Height above ground

(H1)

Top dia of pole

(d1)

Bottom dia of pole

(d2)

Ultimate load at pole top

 (Horizontal)
(W)

Load /mm of deflection at point of load

deflection under ultimate load

(D)

M M M mm mm KN N mm

6.5

7

7.5

8

8.5

1

1.2

1.2

1.5

1.5

5.5

5.8

6.3

6.5

7

150

150

150

150

150

242

248

256

263

270

5.58

5.53

5.38

5.29

5.20

13.8

13.5

12

10.5

9.1

605

632

712

790

901

9

9.5

10

1.5

1.5

1.5

7.5

8

8.5

150

150

150

277

284

291

5.15

5.13

5.13

7.8

6.8

5.9

1045

1196

1378

10.5

11

11.5

1.5

1.8

1.8

9

9.2

9.7

150

150

150

298

305

312

5.16

5.18

5.21

5.3

5.0

4.5

1540

1636

1824

12 1.8 10.2 150 320 5.23 4.1 2007

 

  Ultimate load Test Method.

thu do cong 1
                                                                              Ultimate load Test Method.

+ composite type double pole.

The FRP pole is for the Distribution pole, the minimum diameter is 150mm, the maximum diameter is 320mm and the maximum length: 12500mm.

cot composite doi
                                                                          composite type double pole

PARAMETERS.

- 12.5M 2 Section Straight pole.                                                                      -Bottom Section bottom diameter: 320mm.

- Taper: 18% (18mm/m).                                                                                - Bottom Section Length: 6.2m.

- Top Section Length: 6.5m.                                                                           - Bottom Section top diameter: 219.6mm.

- Top Section top diameter: 150mm.                                                               - Bottom Section bottom diameter: 320mm.

- Top Section bottom diameter: 249mm.                                                                  REMARKS:

- Bottom Section Length: 6.2m.                                                                     -Specification: meet the requirements of ANSI L136.20-1990.

- Bottom Section top diameter: 219.6mm.                                                      - The pole is designed to withstand wind speed of 144km/h (40m/sec).

- Bottom Section bottom diameter: 320mm                                                    - The pole is designed to meet maximum deflection of 10%.

+ Additional Acessaries.

          -  FRP CROSSARM                                       -  FRP BRACES

          -  FRP GUY WIRE & ANCHOR ROD               -  FRP SUPPORTING ROD

          -  GUY MARKER

FRP composite ultility poles, the double wall structure of a FRP transmission pole with excellent buckling strength assembled from two

pultruded “building block’’ elements.
 

cot dien 1, FRP Pole composite, power pole composite, composite material, morstar
COMPOSITE POWER POLE

 

frp power pole, FRP Pole composite, power pole composite, composite material, morstar
FRP POWER POLE

                                                                   

frp power pole1 1, FRP Pole composite, power pole composite, composite material, morstar
frp power pole

                 

cot dien composite1, FRP Pole composite, power pole composite, composite material, morstar
frp power pole

 

trutrenbien, FRP Pole composite, power pole composite, composite material, morstar
COMPOSITE POWER POLE AT SEA
tru doi composite da composite, FRP Pole composite, power pole composite, composite material, morstar, double power pole composite
FRP CROSSARM and DOUBLE POWER POLE COMPOSITE

 

FRP Pole composite, power pole composite, composite material, morstar
composite power pole
composite power poles
composite power poles
 
composite power poles double style
 
cot dien composite 5, FRP Pole composite, power pole composite, composite material, morstar
FRP Pole composite, power pole composite

Test the composite pole by the process.
 

composite poles
 
test composite power poles

 

test FRP pole
 
composite poles

 

Composite poles is MORNINGSTAR provide synchronous help facilitate the installation

For more information, please contact us at www.morstar.vn

  Reader Comments

Security Code   
You did not use the site, Click here to remain logged. Timeout: 60 second